Even though many are adamant about buying a pre-owned vehicle, there is nothing wrong if you go for this option instead of buying a brand new car. It is a practical choice and will suit your budget. Whether this is a first car or an additional one for your family, you can find excellent quality from the used cars in Phoenix. Now that buying used cars is a growing trend, you must know how to inspect it thoroughly.

If you do not know that much about cars, most dealerships have their mechanic who inspects the vehicle for you. But if you have a trusted person or mechanic who can do the inspection, much better. So here are the essential things to inspect before you seal the deal with your car dealership:

Inspect The Body

The outside of the car is as important as its interior. To properly do an inspection, make sure that the vehicle is clean. This way, you can quickly inspect the surface of the car and check for any signs of rust. If there is any, that could only mean that the vehicle is usually exposed to rain. Check for any scratches and discoloration too.

Do Not Forget The Engine Bay

You must know what’s under that hood. Check the engine bay and see if there are any welded or bolted parts of the frame. And this will tell you that the car has been in a front-end collision from its previous owner. Also, if you see any scratch marks at the top of fender bolt heads, that means that the front panel has already been realigned or replaced.

The Tires Should Be Checked

Another critical thing to check is the tires of the vehicle. Expect to have tire wear, but it should be even on all the four corners. If you notice uneven wear, that means that the previous owner has not adequately rotated the wires. Worst case scenario that could also say that a bad wheel alignment caused it.

Go For A Test Drive

It is imperative that before you seal the deal, you have taken the car for a drive. Simply because this is the best way to figure out if this is the right vehicle for you. While you’re at it, try driving it at 40kph to 50kph then step on the brake. If you feel any vibration on the pedal, that means that there is a problem with the brake rotors. It could also mean that you will need new pads. If it swerves when you brake, it is a sign of a worn steering system. It can also mean that the car has problems with the brake calipers.

Again, carefully inspect every aspect of the car. And this is your only chance to get to know the vehicle that you are planning to purchase. Now that you know the basics when inspecting the car, there is no doubt that you will find the best car for you.

About The Author

Norma Mitchell